Hotline: 0902862116
Manufacturers: GST
Origin: China
DI-9302E Digital High Voltage Relay Module is loop powered product , Provide two groups dry contact output (N/O COM N/C), also possible receives switch signal (dry contact, either N/O or N/C) from field equipment , The input and output can be programmed to monitor and control the same or different equipment. With TEST button on module, press and hold it to manually active the module output to simulate receiving the start command from the connected FACP.
Feature
☆Built-in microprocessor and AD sampling technology
☆Electronically addressed
☆Optional to program as “Invert Mode”, need compatible panel
(GST-IFP4E) support
☆Two groups normally open or normally close dry contact ouput
☆Input port monitored with 4.7KΩ EOLR
☆With a protective cover to prevent electric shock from touching
the terminal
☆With a TEST button to manually active module output
☆Rail mount or surface mount
Technical Specifications
☆Loop 24V(16V~28V)
☆Standby Current: ≤ 0.34 mA
☆Action Current: Loop ≤ 7.88mA
☆Output Control Way:
Relay normally open/normally
closed contact input
☆Output Capacity: Capacity is 220VAC /5A
☆Programming: Electronically addressing
☆Address Range:
Option 1: Both Input and Output occupy one address that
ranges from 1 to 242
Option 2: Occupy two addresses representing Input and Output.
Input address range is 1 to 241. Output address is automatically
programmed as input address plus 1
☆Ingress Protection Rating: IP30
☆Operating Temperature: -10°C ~ +55°C
☆Relative Humidity: ≤ 95%, Non Condensing:
☆LED: ≤ 95%, Non Condensing
Input LED: Red. It lights in receiving feedbacks, lights 0.5s on,
0.5s off in input faults, flashes twice in power fault and flashes in
other states
Output LED: Red. It lights in relay action. It turns off in other
states
☆Dimension (L×W×H): 92.8mm×79.2mm×46mm
☆Weight: About 120g
☆Materials of the Enclosure: ABS, white(RAL9016).
