Model-DSB-2-Dry-Sprinkler-Boot-For-Use-With-TFP-Dry-Type-Sprinklers

Hotline: 0902862116 
  • Model-DSB-2-Dry-Sprinkler-Boot-For-Use-With-TFP-Dry-Type-Sprinklers

  • Product code: DSB-2
  • Thương hiệu: TYCO

    Xuất xứ:  Anh/Mỹ

Tải tài liệu
Liên hệ đặt hàng

DESCRIPTION:

The TYCO Model DSB-2 Dry Sprinkler Boot (Ref. Figure 1) is designed for use with TFP Dry Type Sprinklers. When properly installed, it will help close the air gap created by the clearance hole through a wall or ceiling through which the dry type sprinkler has penetrated.

The DSB-2 is intended predominately for use with clearance holes through freezer ceiling structures. In these types of installations, due to the greater temperature difference between the inside and outside of the freezer than found with other type installations, the potential for the formation of condensation in the sprinkler and subsequent ice build-up is increased. If this condensation is not controlled, ice build-up can occur that might damage the dry type sprinkler and/or prevent proper operation in a fire situation.

zalo
zalo